.. Itron HAB01 documentation master file, created by sphinx-quickstart on Sun Jul 7 06:58:58 2019. You can adapt this file completely to your liking, but it should at least contain the root `toctree` directive. Itron HAB01 ======================================= .. image:: images/hab01.jpg :alt: iTron HAB01 Overview -------- The ITRON HAB01 is compatible with the iTach API and has connectors/modules organised as follows: Module 1 – Relay module – total of 8 connectors Module 2 – IR transmitters – total of 3 connectors Module 3 – Serial – total of 1 connector IR Transmitters --------------- The unit has 3 2.5mm IR outputs. They are compatible with the iTach API except there is no functionality to change the mode of the IR port. IR commands will also be accepted on module 1 from connector 1 to 3. Relays ------ The unit has 8 10A 250V AC relays. 3 outputs of each relay are exposed via the screw terminal connector on the rear of the unit, N/O (Normally open), N/C (normally closed) and C (Common). .. toctree:: :maxdepth: 2 setup/index api/index hardware/index